Phantom Miro C320

Phantom Miro C320

The Phantom Miro C320J and C320 provide HD imaging for on-board auto crash testing and a range of other applications.

  • 1480 fps at 1920 x 1080
  • Exposure Range:
    • Mono 10,000 – 50,000
    • Color 2,000 – 10,000
  • Memory Capabilities:
    • 8 or 16 GB RAM
    • 240 GB internal, non-removable CineFlash
  • Models:
    • C320J – 1 cable connection to Miro JBox 2.0
    • C320 – stand-alone or Miro JBox compatible

Açıklama

Short Description
  • The Phantom Miro C320J and C320 are small and  rugged, yet offer up to 1,480 fps at full 1920 x 1080 resolution.  In addition to 3 Gpx/sec throughput, the cameras come with an internal battery and flash to protect critical images in the event of power loss. The C320J connects to the Miro J-Box with a single cable, and the C320 can operate either stand-alone or connect to the J-Box with an adapter cable.
Throughput/Speed
  • 3 Gpx/sec
  • Max speed at full resolution of 1920 x 1080 is 1480 fps
  • Max speed  at the minimum resolution of 640×8 is 94,510 fps
  • Minimum frame rate at all resolutions is 100 fps.
Sensor Specifications
  • CMOS Sensor
  • 1920 x 1080 pixels
  • 10 µm pixel size
  • 22.03 mm diagonal
  • 10-bit pixel depth
  • ISO Monochrome 10,000D
  • ISO Color 2,000D
  • CAR: 640 x 8
Exposure
  • 1 µs minimum exposure
  • Auto Exposure
Memory
  • 8GB or 16GB internal RAM, 240GB internal, non-removable CineFlash
Record Times
  • 4.4 seconds at maximum frame rate, largest resolution and into maximum internal memory (16GB)
Special Features
  • Segment memory for up to 63 cines in multi-cine mode
  • Image-Based Auto-Trigger (IBAT)
  • HD-SDI
  • Continuous recording
  • Memory gate
  • Event marking
  • Frame timestamp ((IRIG SMPTE or MISP)
  • IRIG In: C320 – modulated or unmodulated
  • IRIG In: C320J – unmodulated
  • IRIG Out: C320/C320J -unmodulated
  • Burst Mode
  • PIV Mode
  • Straddle time 1160 ns
  • Secondary IP address
  • Field-based firmware upgrade capable
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger standard
  • Trigger from software
  • Hardware trigger BNC on MiniBob and Miro Junction Box
  • High Voltage (HV) trigger compatible
Timing and Synchronization
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG In: C320 – modulated or unmodulated
  • IRIG In: C320J – unmodulated
  • IRIG Out: C320/C320J -unmodulatedIRIG In (modulated or unmodulated)
Signaling
  • C320J: System/Camera connector (Trigger, IRIG in, IRIG out, Ready, Aux, Ethernet) (Aux signal can be assigned to Event, Memgate or FSYNC)
  • C320: Capture connector (Trigger, IRIG In, IRIG Out, Aux1, Aux2)
  • Aux1 signal can be assigned to FSYNC, Event, Strobe or Memgate.
  • Aux2 signal can be assigned to Ready or Strobe.
Connectivity
  • Gb Ethernet for control and data
  • C320J: Ethernet is accessed through the system cable.
  • C320: Ethernet is accessed through an Ethernet cable with a Fischer connector.
Camera Control
  • Phantom Camera Control software (PCC)
  • Multi-Cam software
  • SDK available
Video Out
  • HD-SDI available through DIN 1.0 / 2.3 connector on front of the cameras
Lensing
  • The C320 and C320J have 1″ C-lens mounts that can be reversed to accept CS lenses.
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorithm
  • Flare
  • Pedestal
  • Tone curve
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis

Basic measurements via Phantom Application:

  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Supported File Formats
  • Cine, Cine Compressed, & Cine RAW
  • AVI
  • h.264 mp4
  • Apple ProRes .mov
  • Multipage TIFF
  • MXF PAL
  • MXF NTSC
  • Uncompressed QuickTime
  • Windows BMP
  • OS/2 BMP
  • PCX, TGA, TIFF, LEAD, JPEG
  • JTIF, RAW, DNG, DPX
Power

Camera:

  • 16 – 32 VDC, 13 W, 20W during battery charge.
  • Rechargeable battery for back-up.

Junction Box:

  • 20 – 32 VDC, each camera port accepts 2 AMPS
Mechanical Specifications
  • 2.9 x 2.9 x 3.25 inches, 73 x 73 x 82.5 mm (H x W x D)
  • without lens or lens mount. Weight: 1.2 lbs, 0.54 kg (without lens)
Environmental Specifications
  • Operating Temperature: 0°C – 50°C
  • Storage Temperature: -20°C to +70°C
  • Shock:170G IAW MIL-STD 202G (without lenses)
  • Vibration: 24 Grms, IAW MIL-STD 202G (without lenses)
APIs
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
C320J

  • All cables purchased separately
  • Software included with Junction Box.
  • Junction Box:
    • PCC software
    • Non-sensing power pigtail
    • DIN 1.0/2.3 cable

C320:

  • Power Supply
  • Ethernet Cable
  • Miro MiniBoB
  • DIN 1.0/2.3 cable
  • PCC Software
Popular Accessories
  • DIN 1.0 / 2.3 cable
  • Miro Junction Box
  • Ruggedized Ethernet
  • Control Breakout Box
  • 280W Power supply for Miro Junction Box
Resolution FPS
1920 x 1080 1,480
1920 x 800 1,990
1280 x 1024 1,560
1280 x 720 2,210
1280 x 512 3,090
640 x 480 3,295
640 x 128 11,760
640 x 8 94,510
Common resolutions and frame-rates, other resolutions available.

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Phantom Miro C320” için yorum yapan ilk kişi siz olun

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Proudly powered by WordPress | Theme: SpicePress by SpiceThemes